EasyManua.ls Logo

Mitsubishi ECLIPSE CROSS 2017

Mitsubishi ECLIPSE CROSS 2017
538 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Refer to “To resume the set speed” on page
6-60.
To deactivate
E00609702838
The set speed driving can be deactivated as
follows:
l
Press the CRUISE CONTROL ON/OFF
switch (A) (Cruise control will be turned
off.)
l
Press the “CANCEL” switch (D).
l
Depress the brake pedal.
The set speed driving is deactivated automat-
ically in any of the following ways.
l
When you depress the clutch pedal (on
vehicles equipped with M/T).
l
When your speed slows to approximate-
ly 15 km/h (10 mph) or more below the
set speed because of a hill, etc.
l
When your speed slows to approximate-
ly 30 km/h (20 mph) or less.
l
When the Active Stability Control
(ASC) starts operating.
Refer to “Active stability control (ASC)”
on page 6-53.
WARNING
l
On vehicles equipped with CVT, although
the set speed driving will be deactivated
when shifting to the “N” (NEUTRAL) po-
sition, never move the selector lever to the
“N” (NEUTRAL) position while driving.
You would have no engine braking and
could cause a serious accident.
Also, the set speed driving may be deactiva-
ted as follows:
l
When the engine speed rises and ap-
proaches the tachometer’s red zone (the
red-coloured part of the tachometer di-
al).
CAUTION
l
When the set speed driving is deactivated
automatically in any situation other than
those listed above, there may be a system
malfunction.
Press the CRUISE CONTROL ON/OFF
switch to turn off the cruise control and have
your vehicle inspected by a MITSUBISHI
MOTORS Authorized Service Point.
Cruise control
6-59
OGKE18E1
Starting and driving
6

Table of Contents

Related product manuals