EasyManua.ls Logo

Mitsubishi ECLIPSE CROSS 2017

Mitsubishi ECLIPSE CROSS 2017
538 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
When you reach your desired speed, release
the switch. Your new cruising speed is now
set.
To slow down your speed in small amounts,
push down the “SET -” switch (B) for less
than approximately 1 second and release it.
Each time you push down the “SET -” switch
(B), your vehicle will slow down by approxi-
mately 1.6 km/h (1 mph).
Brake pedal
While driving at the set speed, use the brake
pedal, which disengages the cruise control,
then push down the “SET -” switch (B) and
release the switch momentarily to set a new
desired cruising speed.
To temporarily increase or de-
crease the speed
E00609601407
To temporarily increase the
speed
Depress the accelerator pedal as you would
normally. When you release the pedal, you
will return to your set speed.
NOTE
l
In some driving conditions, the set speed
driving may be deactivated. If this happens,
refer to “To activate” on page 6-56 and re-
peat the speed setting procedure.
To temporarily decrease the
speed
Depress the brake pedal to decrease the
speed. To return to the previously set speed,
push up the “RES +” switch (C).
Cruise control
6-58
OGKE18E1
Starting and driving
6

Table of Contents

Related product manuals