Mitsubishi ECLIPSE CROSS 2017 User Manual

When the sensor performance returns, the
FCM functions will resume operation.
If the display keeps showing the message,
there is a possibility that the sensor has a
malfunction. Contact a MITSUBISHI
MOTORS Authorized Service Point for in-
spection of the sensor.
NOTE
l
The “DRIVER ASSISTANCE CAMERA
BLOCKED” message may temporarily ap-
pear on the information screen when the sen-
sor cannot detect a vehicle, a pedestrian or
an object within range. This is not a mal-
function. When a vehicle or an object comes
within range, the FCM function will resume
and the message will go off.
When the system cannot oper-
ate temporarily
E00693600027
If the system becomes temporarily unavaila-
ble for some reason, the following message
will appear on the information screen of the
multi-information display, the
indicator
will come on in the instrument cluster and the
FCM will automatically be turned off.
If the display keeps showing the message,
there is a possibility that the FCM has a mal-
function. Contact a MITSUBISHI MOTORS
Authorized Service Point for inspection of
the system.
Sensor is too hot or cold
E00693700028
If the system becomes temporarily unavaila-
ble due to the high or low temperature of the
sensor, the following message will appear on
the information screen of the multi-informa-
tion display, the
indicator will come on in
the instrument cluster and the FCM will auto-
matically be turned off.
After the temperature of the sensor has been
in range, the system will automatically return
to operation.
If the display keeps showing the message,
there is a possibility that the FCM has a mal-
function. Contact a MITSUBISHI MOTORS
Authorized Service Point for inspection of
the system.
FCM deactivation due to fault
E00693800029
If the FCM detects a malfunction in the sys-
tem, either one of the following messages
will appear on the information screen of the
multi-information display, the
indicator
will come on in the instrument cluster and the
FCM will automatically be turned off.
If the message remains even after the ignition
switch is turned to the “LOCK” position and
then turned back to the “ON” position or the
operation mode is put in OFF, and then
turned back to “ON”, please contact a
MITSUBISHI MOTORS Authorized Service
Point.
Forward Collision Mitigation System (FCM)
6-85
OGKE18E1
Starting and driving
6

Mitsubishi ECLIPSE CROSS 2017 Specifications

General

Brand	Mitsubishi
Model	ECLIPSE CROSS 2017
Category	Automobile
Language	English