NOTE
l
If the blower speed selection switch, A/C
switch, MODE switch, or air selection
switch is operated while the system is oper-
ating in the AUTO mode, the activated func-
tion overrides the corresponding function of
automatic control. All other functions re-
main under automatic control.
l
Never place anything on top of the interior
air temperature sensor (B), which will pre-
vent it from functioning properly.
Operating the system in man-
ual mode
E00704201278
Blower speed and ventilator mode may be
controlled manually by setting the blower
speed selection switch and the MODE switch
to the desired positions.
To return to automatic operation, press the
AUTO switch.
Adjusting the blower speed
E00772300077
Press
of the blower speed selection
switch to increase the blower speed.
Press
of the blower speed selection
switch to decrease the blower speed.
The selected blower speed (A) will be shown
in the display.
Adjusting the temperature con-
trol
E00772400081
Press of the temperature control switch to
increase the temperature.
Press of the temperature control switch to
decrease the temperature.
The selected temperature (A) will be shown
in the display.
NOTE
l
The temperature value of air conditioner is
switched in conjunction with outside tem-
perature display unit of the multi-informa-
tion display.
Refer to “Changing the temperature unit” on
page 5-16.
l
While the engine coolant temperature is low,
the temperature of air flowing will not be
changed, even if you have selected warm air
with the switch.
To prevent the windscreen and windows
from fogging up, the mode selection will be
changed to “ ” and the blower speed will
be reduced while the system is operating in
the AUTO mode.
l
When the temperature is set to the highest or
the lowest, the air selection and the air con-
Automatic air conditioning*
7-08
OGKE18E1
For pleasant driving
7
To Next Page
Loading...
Need help?
General
