NOTE
ditioner will be automatically changed as
follows.
Also, if the air selection is operated manual-
ly after an automatic changeover, manual
operation will be selected.
•
When the temperature is set to the highest
setting (HI).
Outside air will be introduced and the air
conditioner will stop.
•
When the temperature is set to the lowest
setting (LO).
Inside air will be recirculated and the air
conditioner will operate.
l
The settings described above are the factory
settings.
The air selection and air conditioning
switches can be customised (function setting
changed), and the automatic switching of
outside air and the air conditioner according
to operating conditions can be changed as
desired.
For further information, we recommend you
to consult a MITSUBISHI MOTORS Au-
thorized Service Point.
Refer to “Customizing the air conditioning”
on page 7-16.
Switching the air conditioning
system ON/OFF
E00772900099
Press the switch to turn the air conditioner
on, the “ ” indicator (A) will be shown in
the display.
Press the switch again to switch it off.
Switching outside air and recir-
culated air
E00772700084
To change the air selection, simply press the
air selection switch.
l
Outside air: Indication lamp (A) is OFF
Outside air is introduced into the passen-
ger compartment.
l
Recirculated air: Indication lamp (A) is
ON
Air is recirculated inside the passenger
compartment.
CAUTION
l
Normally, use the outside position to prevent
the windows from fogging up.
Use of the recirculation position for exten-
ded time may cause the windows to fog up.
Switch to the outside position periodically to
increase ventilation.
NOTE
l
If effective cooling performance is desired,
use the recirculation position.
l
When pressing the AUTO switch after man-
ual operation, the air selection switch is also
controlled automatically.
Automatic air conditioning*
7-09
OGKE18E1
For pleasant driving
7
To Next Page
Loading...
Need help?
General
