4
PARAMETERS
389
Check and clear of the alarm history
(2) Clearing procedure
POINT
· The alarm history can be cleared by setting "1" in Er.CL Alarm history clear.
1.Screen at powering on
The monitor display appears.
Display
Operation
2.Press to choose the parameter
setting mode.
3.
Flicker ··· Alarm history clear complete!!
6.Press to set.
4.Press to read the currently set value.
" "(initial value) appears.
· Press to show the setting again.
· Press twice to show the next parameter.
· Press to read another parameter.
5.Turn to change it to the
setting value " ".
The parameter
number previously
read appears.
To Next Page
Loading...
