Mitsubishi FX-1PG User Manual

9. EXTERNAL CONNECTION EXAMPLES
9.1 Example of Connection Between FX-1PG and Stepper Motor
*1: Connect either one in accordance with the external supply voltage. (See Section 8.1 Output Specifications.)
*2: The number of counts of zero signals is adjusted to 0 when there is no home position sensor.
At this time, when the dog input operates, the motor stops at once.
Make the home position return speed low-speed very because it does not destroy the machine.
Extension cable
L N 24V RUN X0 X1 X2 X3 X4 X5 X6 X7 SG
STOPRUN
Error
reset
Forward
limit
Reverse
limit
JOG+
JOG-
Home
position
Start
3.3kΩ
FX,FX
2C Series PC
S/S0V
Sensor
power supply
24V DC
9
FX-1PG/FX 2N -1PG PULSE GENERATOR UNIT EXTERNAL CONNECTION EXAMPLES
9-1

Mitsubishi FX-1PG Specifications

General

Brand	Mitsubishi
Model	FX-1PG
Category	Pulse Generator
Language	English