*1 FX-1PG: Connect the VH terminal when the power is supplied from the MR-J2. Connect either the
VH or VL terminal in accordance with the supply voltage when the power is supplied from an external
power supply. (See Section 8.1.)
FX
2N
-1PG: Connect the VIN terminal.
*2 Pin No. can be modified using the extension parameter. (The example below shows the case where the initial
value is set.)
SG S/S DOG STOP *1 FP
COM0
RP
COM1
CLR PG0+ PG0-
SG NPPPSD OPP15R
LSD STOP
Plate 10 23
OPC
11
SG terminal is not provided
in FX
2N, so this wiring is not
required in FX
2N.
Extension
cable
144
CRSG
810
CN2
Encoder
24V DC
P C
Regeneration
option
*2
FX-1PG
FX
2N-1PG
CON1A
9
FX-1PG/FX
2N
-1PG PULSE GENERATOR UNIT EXTERNAL CONNECTION EXAMPLES
9-10
To Next Page
Loading...
Need help?
General