Mitsubishi MELSEC Q Series Handbook

3 ETHERNET INTERFACE MODULE REPLACEMENT
3 - 16
: Compatible, : Partial change required, ×: Incompatible
Output signal
Signal name
Compat-
ibility
Precautions for
replacement
A series AnS series Q series
AJ71E71N3-T
AJ71E71N-B5
AJ71E71N-B2
A1SJ71E71N3-T
A1SJ71E71N-B5
A1SJ71E71N-B2
QJ71E71-100
QJ71E71-B5
QJ71E71-B2
Yn0 Transmission request or reception end check (For connection No.1)
Yn1 Transmission request or reception end check (For connection No.2)
Yn2 Transmission request or reception end check (For connection No.3)
Yn3 Transmission request or reception end check (For connection No.4)
Yn4 Transmission request or reception end check (For connection No.5)
Yn5 Transmission request or reception end check (For connection No.6)
Yn6 Transmission request or reception end check (For connection No.7)
Yn7 Transmission request or reception end check (For connection No.8)
Yn8 Open request (For connection No.1)
Yn9 Open request (For connection No.2)
YnA Open request (For connection No.3)
YnB Open request (For connection No.4)
YnC Open request (For connection No.5)
YnD Open request (For connection No.6)
YnE Open request (For connection No.7)
YnF Open request (For connection No.8)
Y(n+1)0
Use prohibited
Y(n+1)1
Y(n+1)2
Y(n+1)3
Y(n+1)4
Y(n+1)5
Y(n+1)6
Y(n+1)7 COM. ERR LED OFF request
Y(n+1)8 Use prohibited
Y(n+1)9 Initial request
Y(n+1)A
Use prohibited
Y(n+1)B
Y(n+1)C Buffer memory channel switching -
Buffer memory channel
setting is not required.
Delete the sequence
program of the section
corresponding to the
function.
Y(n+1)D
Use prohibited
Y(n+1)E
Y(n+1)F

Mitsubishi MELSEC Q Series Specifications

General

Brand	Mitsubishi
Model	MELSEC Q Series
Category	Controller
Language	English