Mitsubishi Q12PRHCPU - Page 153

5
REDUNDANT SYSTEM FUNCTIONS
5.4 Operation Mode Change Function
5 - 70
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
TRACKING CABLE
4
PROCEDURE FOR STARTING UP A REDUNDANT SYSTEM
5
REDUNDANT SYSTEM FUNCTIONS
6
REDUNDANT SYSTEM NETWORKS
7
PROGRAMMING CAUTIONS
8
TROUBLESHOOTING
In Separate Mode
Control System Standby System
During Normal
RUN and During
Resume Error
During Stop
During Stop
Error
During Normal
RUN and During
Resume Error
During Stop
During Stop
Error
Executes the
program
Does not execute the program
Executes the
program *3
Does not execute the program
Reflects the
operation result of
the control
system.
Holds.
Reflects the
operation result of
the standby
system.
Holds.
ON
OFF
ON
OFF
Executes it Executes it
Does not execute the check Does not execute the check
Executes the function Executes the function
Does not execute
function
Executes the check on the specified CPU module only. Executes only on specified CPU module
Executes only on specified CPU module Executes only on specified CPU module
Input it Input it
Output it Does not output it Output it Does not output it
Executes input Does not execute input
Executes output Does not execute output
Executes the function
Does not perform
output it
Executes the function
Does not perform
output it
Executes the function Executes the function
Executes auto refresh Does not execute auto refresh
Executes auto refresh Does not execute auto refresh