4 - 14
4.7 Writing Parameters and Programs to CPU
4
PROCEDURE FOR STARTING UP A REDUNDANT
SYSTEM
4.7 Writing Parameters and Programs to CPU
Write parameters and programs to the CPU modules (one CPU module in the debug
mode) of System A and System B according to the following procedures.
(1) Display of Write to PLC Screen
Select [Online] to [Write to PLC] from the menu bar to display the "Write to PLC"
screen.
(2) Selection of Write Data
Click the "Parameters and Programs" button, and select parameters and programs as
Write Data.
(3) Execution of Write to PLC
Click the "Execute" button.
As the following confirmation dialog box appears, click "Yes".
Diagram 4.12 Write to PLC Screen
Diagram 4.13 Execution of Write to PLC Confirmation Window
To Next Page
Loading...
