Mitsubishi Q12PRHCPU - Appendix 2 Comparison of Qn(H)CPU and QnPRHCPU

App - 5
Appendix 2 Comparison of Qn(H)CPU and QnPRHCPU
APPENDICES
Appendix 2 Comparison of Qn(H)CPU and QnPRHCPU
A Comparison of Qn(H)CPU and QnPRHCPU is shown in Table App.3.
Table App.3 Comparison of Qn(H)CPU and QnPRHCPU
Item QnPRHCPU QnHCPU
Performance Scan Time
Scan time is increased by the tracking time.
Inside device 48 k word setting time
• Synchronized tracking mode: 41 ms
• Program priority mode: 21 ms
–
System
Configuration
A Series Module N/A Applicable
Maximum Number of Modules
Mounted on Main/Extension
Base Unit
<<First 5 digits of serial No. is "09011" or earlier>>
11 modules (Main base unit only)
Modules which are not duplicated are mounted to
MELECNET/H remote I/O station (Number of
mountable modules on remote I/O station: 64
modules per station)
<<First 5 digits of serial No. is "09012" or later>>
Up to 63 modules
(Main base unit + extension base unit: 7 stages)
64 Slots (Main base unit + Extension base
unit: 7 stages)