Mitsubishi Q12PRHCPU - When Connecting Gots to a Ethernet

6
REDUNDANT SYSTEM NETWORKS
6.3 Communication between the Both Systems CPU Module and GOTs
6.3.4 When Connecting GOTs to a Ethernet
6 - 50
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
TRACKING CABLE
4
PROCEDURE FOR STARTING UP A REDUNDANT SYSTEM
5
REDUNDANT SYSTEM FUNCTIONS
6
REDUNDANT SYSTEM NETWORKS
7
PROGRAMMING CAUTIONS
8
TROUBLESHOOTING
6.3.4 When Connecting GOTs to a Ethernet
The GOT is connected to Ethernet module mounted on the main base unit or Ethernet
module mounted on the extension base unit.
(1) GOT Connection Methods
Connect GOTs to a Ethernet via "Ethernet connection".
Diagram 6.38 GOT Connection Type (when Mounting to Main Base Unit)
Diagram 6.39 GOT Connection Type (when Mounting to Extension Base Unit)
Ethernet
GOT1000 series
GOT-A900 series
(Ethernet connection)
System B/
Standby system
Station
No.2
System A/
Control system
Station
No.1
Tracking cable
Ethernet
GOT1000 series
(Ethernet connection)
System B/ Standby systemSystem A/ Control system
Tracking cable