5
REDUNDANT SYSTEM FUNCTIONS
5.10 Redundant CPU Functions Restricted in Redundant System
5.10.2 Remote Operation for Redundant System
5 - 132
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
TRACKING CABLE
4
PROCEDURE FOR
STARTING UP A
REDUNDANT SYSTEM
5
REDUNDANT SYSTEM
FUNCTIONS
6
REDUNDANT SYSTEM
NETWORKS
7
PROGRAMMING
CAUTIONS
8
TROUBLESHOOTING
(a) Remote operation for the system specified in the Connection Setup of GX
Developer
When "Currently specified station" is selected at the execution destination area on
the Remote operation screen of GX Developer, remote operation is performed for
only the system specified in the Connection Setup, which can be selected from
[Online] from the menu bar of GX Developer.
(The current station can be selected in the "backup mode" and "separate mode".)
For example, when remote STOP is executed after the "control system" is
specified on the Connection Setup screen, remote STOP is executed for the
current control system CPU module.
Diagram 5.99 Remote STOP Operation When Current Station Is Specified
Control system
Standby system
Control system
Standby system
GX Developer
GX Developer
Tracking cable
Tracking cable
RUN RUN
RUN
RUN STOP
To Next Page
Loading...
