Mitsubishi Q12PRHCPU - Page 364

App - 3
Appendix 1 Comparison of Q4ARCPU and QnPRHCPU
APPENDICES
Table App.1 Comparison of Q4ARCPU and QnPRHCPU Redundant Systems (Continued)
Item QnPRHCPU Redundant System Q4ARCPU Redundant System
System
Configuration
GOT
Connection
Type
Bus
Connection
N/A Applicable
CPU Direct
Connection
Applicable (Communication with the CPU module
connected to the GOT only.)
Applicable
Computer Link
Connection
N/A Applicable
MELSECNET/
H Remote I/O
Station
Connection
Applicable (N/A for extension base unit) N/A
CC-Link
Connection
Applicable Applicable
MELSECNET/
H PLC to PLC
Network
Connection
Applicable (N/A for extension base unit) N/A
Ethernet
Connection
Applicable Applicable
Mounting I/O module or
network module on slot 0
Disabled (Slot 1 becomes I/O number "0")
Mount I/O modules and network modules on slots
1 and later.
Enabled
16 character LED display
(auto diagnostics
information and comments
are displayed.)
N/A
Auto diagnostics error information and comments,
etc. can be confirmed using GX Developer.
Available
Manual System Switching
System switching by the system switching
instructions or redundant operation of GX Developer
System switching using switches of bus
switching module (A6RAF)
Manual operational mode
switching
Operation mode change by redundant operation of
GX Developer
Operation mode change using switches
of bus switching module (A6RAF)
CPU module damage
external output
Power supply module error contact output
System management module (AS92R)
CPU/ALRAM/WDT contact point output
Programming
Too l
Q6PU N/A Applicable
SW IVD-GPPQ
N/A Applicable
GX Developer Version 8.18U and later is applicable SW0D5C-GPPW and later is applicable
MX Links N/A
Substituted with MX Component. (PC-side
application program correction necessary.)
Applicable
MX Monitor
MX Chart
Connection Port RS-232,USB RS422 (RS-232/RS-422 converter)