3
TRACKING CABLE
3.3 Connecting and Disconnecting a Tracking Cable
3 - 3
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
TRACKING CABLE
4
PROCEDURE FOR
STARTING UP A
REDUNDANT SYSTEM
5
REDUNDANT SYSTEM
FUNCTIONS
6
REDUNDANT SYSTEM
NETWORKS
7
PROGRAMMING
CAUTIONS
8
TROUBLESHOOTING
(2) Connecting a Tracking Cable
(a) Make sure that you are using the correct tracking cable connector for
System A or System B.
Refer to Section 3.2 and Section 5.1.1, for confirming System A and System B.
(b) Hold the tracking cable connector, and align it with the CPU module
TRACKING connector.
(c) Connect the tracking cable connector to the CPU module TRACKING
connector.
(d) Tighten the connector fixing screws and fix the connector to the CPU
module.
Diagram 3.2 Checking the Connection Orientation of the Tracking Connector
Diagram 3.3 Connecting the Tracking cable Connector
Diagram 3.4 Fixing the Tracking cable Connector
Redundant CPU
Connector
TRACKING connector
Tracking cable
Tracking cable
Redundant CPU
Connector
Connector screws
Flathead screwdriver
Tracking cable
To Next Page
Loading...
