11 - 25
MELSEC-Q
11 MANUAL CONTROL
When "JOG start signal" is turned ON when peripheral devices are in the
test mode:
If "JOG star signal" is turned ON when peripheral devices are in the test mode, the
"JOG start signal" will be ignored and inching operation will not be carried out.
ON
t
OFF
ON
OFF
Inching operation not
possible because JOG
start signal does not rise
Forward run inching
operation executed
Forward run JOG
start signal
[Y8,YA,YC,YE]
In test
mode flag
Md.1
JOG operation not
possible because the
operation is in the
test mode
Fig. 11.15 Operation when JOG start signal is turned ON in test mode
To Next Page
Loading...
