12 - 46
MELSEC-Q
12 CONTROL SUB FUNCTIONS
(3) Add the following sequence program to the control program, and write it to
the CPU module.
K1D108K1514H0DTOP
K1K1K1505H0TOP
K1
K1K62
H0TOP
(QD75 starts speed change processing.)
[Speed change processing]
<Write the new speed. >
Input the external command signal.
Write 1000000 to D108 and D109.
Example
External command
valid signal
<Set the external command function
selection to external speed change
request. >
<Set the external command signal input
to valid.>
To Next Page
Loading...
