8 - 22 8 - 22
MELSEC-Q
8 UTILITY PACKAGE (GX Configurator-MB)
(2) Y: Output signals
To perform a test on output signals, select any item in the Setting value column
and click the Execute test button.
Monitor/Test Item
Buffer memory
address
Reference
section
Y01: Basic parameter setting request
Y04: Automatic communication parameter setting request/automatic
communication start request
Y06: Automatic communication stop request
Y08: MODBUS
R
device assignment parameter setting request
Y1B: COM. ERR. LED OFF request
Y1C: PING test execution request
Section 3.2.1
To Next Page
Loading...
