ENGINE INSPECTION RECORD SHEET
1. Measurement of Cylinder Bore Diameter
2. Measurement of Clearance between Valve Stem and Valve Guide, and Valve Stem Diameter
3. Measurement of Valve Sinkage, Seat Width and Valve Margin
4. Measurement of Distortion of Cylinder Head Bottom Surfaces
5. Measurement of Oil Clearance of Connecting Rod Bearing
6. Measurement of Rocker Arm Inside Diameter and Shaft Diameter
7. Measurement of Piston Pin Bore Diameter and Piston Pin Diameter
8. Measurement of Valve Clearance
9. Measurement of Injection Pressure of Fuel Injection Nozzle
10.Measutrement of Clearance between Camshaft Journal Bore Diameter and Camshaft
Bushing
11.Measurement of Crankshaft End Play
To Next Page
Loading...
Need help?
General
