Mitutoyo ABSOLUTE ID-F0550ENX - 2 Preparations before Use

7
No. 99MAH054A
2 Preparations before Use
2
Preparations before Use
2.1
When Used Facing Up
(25.4 mm / 1 in and 50.8 mm / 2 in measuring range models only)
When using the contact point in the upward orientation, replace the internal coil
spring with a reverse orientation coil spring (optional)* as the plunger will not
return to the reference point.
* Part No. 02ACA571: 25.4 mm / 1 in measuring range model
(ID-F0525NX, ID-F0525ENX)
Part No. 02ACA773: 50.8 mm / 2 in measuring range model
(ID-F0550NX, ID-F0550ENX, ID-F0550HNX,
ID-F0550HENX)
B
A
1 4 2 3
1 Removethevescrewsonthebackusinga#0Phillipsscrewdriver,and
thenremovetheatback.
2 Usetweezersortheliketopinchthespringattachmenthooksinthe
orderofAandB,andthenremovethecoilspring.
Do not forcibly pull the removed coil spring by hand.
3 Attach the new coil spring to the spring attachment pins in the order of B
and A.
4 Placetheatbackandtightenthevescrewsonthebackusinga#0
Phillips screwdriver.