Mitutoyo ABSOLUTE ID-F0550ENX - Lifting Knob (Optional)

11
No. 99MAH054A
2 Preparations before Use
■12.7 mm / 0.5 in measuring range model
The lifting lever is an optional accessory.
2
1
3
Cap
Screw
Stop screw
Lifting Lever
1 Rotatethecapcounterclockwisetoremoveitfromtheproduct.
2 Fixtheplunger,usingplierspaddedwitharag,etc.,sothatitdoesnot
turn,andthenremovethescrew(M2.5)ontopoftheplunger.
3 Mountthestopscrewand,withthelevertipcaughtbythestopscrew,
mount the lifting lever on the lifting lever mount (dovetail).
Tips
Store the removed screw and cap to prevent loss.
2.3.2 Lifting Knob (Optional)
For lifting knobs (optional) that can be mounted to this product, refer to "10
Accessories (Optional)" on page 85.
NOTICE
Usingtheproductwhiletheliftingknobisnotsecuredrmlymaydamageinternal
components or the workpiece.