Mitutoyo ABSOLUTE ID-F0550ENX - Selecting Digimatic Output

67
No. 99MAH054A
5 Setting Parameters
(Short press) / (Long press)
5.11.3 Selecting Digimatic Output
The data format setting for external output of displayed values can be changed.
Select from DIGIMATIC d1 (6-digit output) or DIGIMATIC d2 (8-digit output).
2
-1
2
-2
1
F2
F2F1/F3
Go to the
next item
1 Pressthe[F2]key.
» Digimatic output selection can be set.
2 Select the data format for digimatic output.
1 Press the [F1] key or [F3] key.
» Each time the key is pressed, it will switch between [d1] and [d2].
2 Press the [F2] key.
» Settingisconrmed;shiftstothenextparameteritemof"Otherfunctionchanges".
(Go to "5.11.4 All Reset" on page 68.)
Tips
For details about data format, see "■Dataformat"onpage78.