Mitutoyo ABSOLUTE ID-F0550ENX - Page 30

18
3 Basic Usage
No. 99MAH054A
(Short press) / (Long press)
When the calibration schedule warning function is ON:
» The power turns ON and [todAy] is displayed.
3 Pressthe[F2]key.
When the calibration schedule warning function is OFF:
» The mode switches to measurement mode (current position display).
Measurement mode
(current position display)
When the calibration schedule warning function is ON:
» The current date is displayed.
Pressthe[F2]keytoconrmthecurrentdate.(Example:August25,2020)
F2 F2 F2
Measurement mode
(current position display)
YY MM DD
Tips
• To change the date, refer to step 3 in "5.11.2 Calibration Schedule Warning
Selection/Setting" on page 62.
• For details on turning the calibration schedule warning
ON and OFF, refer to "5.11.2 Calibration Schedule Warning Selection/Setting"
on page 62.
• The measurement mode when the AC adapter is reconnected takes the same
display method and measurement system used prior to unplugging the AC adapter.
Examples: Peak detection, absolute measurement (ABS)