CONTENT
§4.4 WELDING PARAMETERS 71
§4.5 OPERATION ENVIRONMENT 74
§4.6 OPERATION NOTICES 74
§5WELDING TROUBLE SHOOTING 76
§5.1 MIG WELDING TROUBLE SHOOTING 76
§5.2 MIG WIRE FEED TROUBLE SHOOTING 78
§5.3 DC TIG WELDING TROUBLE SHOOTING 79
§5.4 MMA WELDING TROUBLE SHOOTING 82
§6 MAINTENANCE & TROUBLESHOOTING 83
§6.1 MAINTENANCE 83
§6.2 TROUBLESHOOTING 84
§6.3 LIST OF ERROR CODE 87
§6.4 ELECTRICAL SCHEMATIC DRAWING 88
Copyright © 2020 MK Trade GmbH, Wies, Austria
The contents of these User Manual are the sole property of the company MK Trade GmbH.
Passing on as well as copying of this document, the use and distribution of its content are
prohibited if not explicitly permitted. Contraventions are liable to compensation.
Subject to technical modifications and error.
To Next Page
