SAFETY
! Make sure welding machine and power cable to be far away from the operator
as far as possible according to the actual circumstance.
! Connect the work cable to the workpiece as close as possible to the area
being welded.
! The people with heart-pacemaker should be away from the welding area.
Noise can damage hearing.
Noise from some processes or equipment can damage hearing. You must
protect your ears from loud noise to prevent permanent loss of hearing.
! To protect your hearing from loud noise, wear protective ear plugs and/or ear muffs.
Protect others in the workplace.
! Noise levels should be measured to be sure the decibels (sound) do not exceed safe
levels.
Hot parts.
Items being welded generate and hold high heat and can cause severe burns.
Do not touch hot parts with bare hands. Allow a cooling period before working
on the welding gun. Use insulated welding gloves and clothing to handle hot
parts and prevent burns.
§1.3 EMC device classification
Radiation Class A Device.
! Only can be used in the industrial area
! If it is used in other area, it may cause connection
and radiation problems of circuit.
Radiation Class B device.
! It can meet the radiation requirements of residential area and industrial area.
To Next Page
