MK Welding Multi-GMAW 200 DP PFC - Control Panel of Welding Machine

OPERATION
17
EN
§3.2 Control Panel of welding machine
1. Synergic programs indicator.
2. Welding voltage indicator.
3. L digital multifunction display.
4. Arc length indicator.
5. Inductance indicator.
6. Material thickness indicator.
7. Wire feed indicator.
8. R digital multifunction display.
9. Welding current indicator.
10. JOB indicator.
11. Power indicator: Lights when input
power connected and machine
switched on.
12. Water cooling system error indicator.
13. Spool Gun indicator.
14. Alarm indicator.
15. L parameter select/ adjust knob.
16. R parameter select/ adjust knob.
17. JOB button.
18. Program save/delete button.
19. Function button.
20. Trigger mode select button: Select 2T/4T/S4T/Spot Weld
21. Manual wire button.
22. Welding process select button: Select MIG-MAG Pulse SYN/MIG-MAG dual pulse
SYN/
MIG-MAG Manual / MIG-MAG SYN/MMA/TIG
23. Air check button.