SAFETY
§1 Safety
Welding and cutting equipment can be dangerous to both the operator and
people in or near the surrounding working area, if the equipment is not correctly
operated. Equipment must only be used under the strict and comprehensive
observance of all relevant safety regulations. Read and understand this
instruction manual carefully before the installation and operation of this
equipment.
§1.1 Symbols Explanation
! The above symbols mean warning!
Notice! Running parts, getting an electric shock or making contacts with
thermal parts will cause damage to your body and others. The underline
message is as follows:
Welding is quite a safe operation after taking several necessary
protection measures!
§1.2 Machine Operating warnings!
! The following symbols and words explanations are for some damages to your
body or others, which could happen during the welding operation. While seeing
these symbols, please remind yourself and others to be careful.
! Only people who are trained professionally can install, debug, operate,
maintain and repair the welding equipment covered with this Operator’s Manual!
! During the welding operation, non-concerned people should NOT be around,
especially children!
! After shutting off the machine power, please maintain and examine the
equipment according to §7 because of the DC voltage existing in the electrolytic
capacitors at the output of the power supply!
To Next Page
Loading...