Operating the unit
15Operating instructions
4.2.2 Selecting the heating mode
The heating mode can be switched flexibly during cooking.
Switching between heating with the central heating element or
all heating elements is possible at any time.
The setting can be set and saved for programmed cooking.
Requirement The unit is switched on
1. Press the "Central heating" button.
The "Central heating" indicator light illuminates.
Heating with the central heating element is selected.
2. Press the "Central heating" button.
The "Central heating" indicator light goes out.
Heating with all three heating elements is selected.
4.2.3 Using plate detection
Plate detection is active after the unit is switched on.
Requirement The unit is switched on
1. Press the plate against the contact cover.
The functions for cooking, keeping food warm or the cooking
program start automatically.
2. Remove the plate from the contact cover.
The functions for cooking, keeping food warm or the cooking
program end automatically.
4.3 Manual cooking
4.3.1 Cooking
Requirement The unit is switched on
1. Press the "Mode select" button until the "Cook" indicator light
illuminates.
The cooking function is selected.
The "Cook" indicator light illuminates.
Display shows the last set cooking time.
2. Press the "+" button or "–" button.
Display shows the set cooking time.
1001247120ABBE-C
To Next Page
Loading...
