Operating the unit
16 Operating instructions
3. Press the "Start Stop" button or push the plate against the contact
cover.
The cooking function is started.
The set cooking time counts down.
Display shows the remaining cooking time.
An audible signal sounds, after the cooking time has elapsed.
The unit switches automatically to operating readiness, as
soon as cooking, keeping food warm or a cooking program is
ended or interrupted.
The audible signal ends after several minutes.
4.3.2 Keeping food warm
The food being cooked retains the temperature, which is
reached during cooking, over a long period of time.
The cooling of the food being cooked is dependent on the level
and time selected for keeping food warm.
Requirement The unit is switched on
Heating unit adjusted to the maximum distance from the food being
cooked
All heating elements selected
1. Press the "Mode select" button until the "Hold" indicator light
illuminates.
The function for keeping food warm is selected.
Display shows the levels for keeping food warm.
The "Hold" indicator light illuminates.
2. Press the "+" button or "–" button.
Display shows the selected level for keeping food warm.
3. Press the "Start Stop" button or push the plate against the contact
cover.
The function for keeping food warm is started.
Display shows a rotating signal.
4. Press the "Start Stop" button or pull out the plate.
The function for keeping food warm is ended.
Tip
In order to keep food hot, use preheated and heat-resistant
dishes.
1001247120ABBE-C
To Next Page
Loading...
