Cleaning and caring for the unit
21Operating instructions
5.3 Cleaning the housing
ATTENTION
Risk of physical damage from improper cleaning
• Do not clean the housing with highly abrasive or chemically
aggressive cleaning agents.
• Do not clean the housing with highly abrasive sponges.
If the unit is to be put out of action for a longer period of time,
carefully rub all stainless steel surfaces with a cloth, which has
been soaked in vaseline oil, in order to apply a thin protective
layer.
Requirement Unit switched off and cooled down
Clean the housing with warm water and commercially available
washing-up liquid.
5.4 Cleaning the collection container and grate
Requirement Unit switched off and cooled down
Collection container and grate cooled down
1. Remove the collection container and grate from the unit.
2. Clean the collection container and grate with warm water and a
commercially available washing-up liquid.
3. Remove stubborn dirt residue with a suitable stainless steel brush
and stainless steel cleaner.
1001247120ABBE-C
To Next Page
Loading...
