Operating the unit
18 Operating instructions
4.4.2 Using the cooking program
Requirement The unit is switched on
No cooking program selected
1. Press the "Start Stop" button until the "Start Stop" indicator light
goes out.
Function for cooking or keeping food warm is switched off.
"P1" button, "P2" button and "P3" button are activated.
2. Place the plate on the grate.
3. Adjust the heating unit to the desired height.
4. Press the button of the corresponding program.
The cooking program starts.
4.5 Gratinating and caramelising
CAUTION
Risk of burns from hot surfaces
• Protect arms and hands by wearing suitable protective
gloves.
ATTENTION
Physical damage through overheating the food being
cooked
• Avoid excessive heat impact on the food being cooked.
Change the height adjustment, if the browning on the surface of
the food being cooked is too strong.
Requirement The unit is switched on
1. Prepare the food to be cooked on the plate.
2. Select the cooking function or saved cooking program.
3. Place the plate on the grate.
4. Adjust the heating unit to the desired height.
5. Press the "Start Stop" button or push the plate against the contact
cover.
The cooking function or a saved program is started.
6. Press the "Start Stop" button or remove the plate from the contact
cover.
The unit switches automatically to operating readiness, as
soon as the function for cooking, keeping food warm or a
cooking program is ended or interrupted.
An audible signal sounds, after the cooking time has elapsed.
The audible signal ends after several minutes.
1001247120ABBE-C
To Next Page
Loading...
