143/152
Additional Notes
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
3.6 Additional Notes
3.6.1 Weatherproofness
The MOBOTIX Q25 has been certified according to protection class IP65 (absolutely dust-
proof and resistant against water jets) and can also be wall-mounted outdoors using the
corresponding wall mount.
3.6.2 Password for the Admin Menu
Accessing the Administration Menu of the camera (Admin Menu softbutton) is only pos-
sible after entering a user name and password.
• Factory default user name is admin.
• Factory default password is meinsm.
The Quick Installation assistant automatically appears when the Administration Menu is
accessed for the first time. It provides an easy method to adjust the basic camera settings
to the current application scenario. For security reasons, we highly recommend chang
-
ing the default administrator password after the camera has been properly configured.
Enter the user name and password exactly as shown above. Note that all entries are
case-sensitive.
Caution
Make sure that you store information on user names and passwords in a secure
place. If you lose the administrator password and cannot access the administration
menu, the password can only be reset at the factory. This service is subject to a fee!
3.6.3 Permanently Deactivating the Microphone
Deactivating a camera’s microphone may be necessary in order to protect the privacy of
persons at a workplace or for other reasons. You can permanently and irreversibly deac
-
tivate the microphone in the Admin Menu> Loudspeaker and Microphone dialog box.
3.6.4 Starting the Camera with the Factory IP Address
If the camera’s IP address is not known, you can start the camera with its factory IP
address.
Section 3.2.4, «Starting the Camera with Factory (Network) Settings»
describes
this procedure in more detail.
The microphone can be
irreversibly deactivated!
To Next Page
Loading...
