INFO A message that documents an event that occurs
TRACE A message that documents the progress of a function
Individual debugging levels can be set for the following program sections:
Modul Function
Wireless Reports events related to the WLAN interface. The emphasis
is on the recording of the access points and on the roaming
procedures.
WPA
Supplicant
Here, authentication processes can be documented.
DHCP Messages generated by the DHCP client or server
Serial Messages generated by the module for controlling the serial
interface
Relay Messages generated by the module for triggering the relay
Aux-Input Messages generated by the module for controlling the digital
input
Base System Messages that the general operating system generates
Network
Bridge
Messages generated by the bridge module.
The individual program parts have 4 debug levels:
Level Messages issued
Default ERROR
Information ERROR + WARN
Detailed ERROR + WARN + INFO
Maximum ERROR + WARN + INFO + TRACE
The "Maximum" level should really only be activated for the program module, which probably has a problem.
This level may generate such a large number of debug messages that the performance of the primary
application suffers.
MC Manual Version 2.10c
To Next Page
Loading...
