Hardware & Tool required
Hardware & Tool required
Insert 1 piece of Front Leg (3) into the upper hole on the bottom of Seat Frame(2) as shown.
Attach by 2 pieces of Bolt (B), 2 pieces of Spring Washer (E) and 2 pieces of Flat Wahser (D) as shown.
Repeat the same steps for Front leg (3)
Do not fully tighten Bolts (B) for either leg.
STEP 3:
Carefullly turn over the chair.
Please put a heavy object or seat one adult on top of the Seat Frame (2) to pressure the chair for leveling.
Fully tighten all Bolts (A,B,C) with Allen Wrench (F).
STEP 4:
Assembly is completed. The chair is ready to use now!
Page 3 of 3
Bx4 Dx4 Ex4
Fx1
1
2
3
F
B
E
D
Fx1
2
F
Customer Service 609-256-9000
www.modway.com
EEI - 1384/1491/3779 CHAIR
To Previous Page
Loading...
