Need help?Do you have a question about the Molbio Trueprep AUTO v2 and is the answer not in the manual?
General| Brand | Molbio |
|---|---|
| Model | Trueprep AUTO v2 |
| Category | Laboratory Equipment |
| Language | English |
Overview of the device, its purpose in nucleic acid amplification, and its portability.
Explains the electromechanical process of heating, mixing, and adding reagents for sample prep.
Advises against placing the device near interference sources or in direct sunlight.
Specifies the recommended room temperature and humidity for safe operation.
Lists the items included with the Trueprep® AUTO v2 device and accessories.
Lists compatible consumables and kits not included with the main device.
Identifies and describes the controls and indicators on the top panel of the device.
Identifies and describes components on the back panel of the device.
Describes the disposable, single-use cartridges used for sample processing.
Instructions on powering on, battery status, using the AC adapter, and charging indicators.
Guide on connecting the 25T and 50T reagent bottle packs to the device.
Steps to reset the buffer count after completing reagent packs for 25T or 50T.
Instructions on how to turn the Trueprep® AUTO v2 device on and off.
Steps for inserting the cartridge and initiating the sample preparation process.
Procedure for removing and replacing the middle replaceable tray in the cartridge holder.
Details common error codes, display messages, types, and solutions for cartridge/reagent issues.
Instructions on accessing and navigating the device's user menu for settings and status.
Steps for performing a flushing cycle using distilled water.
Guidelines for disposal of consumables, cleaning, spill management, and instrument disposal.
Explains common symbols like IVD, Catalogue number, Serial number, and temperature limits.
Explains symbols related to handling, operation mode, and power source.
To Next Page
