Page 14 of 34
4 Setup and commissioning
4.1 Unpacking the device and checking the scope of supply
Delivery of the Vibrasat
®
Pro comprises at least 2 packaging units, depending on the scope
of the delivery. Make sure that no parts remain in the packaging when unpacking the
Vibrasat
®
Pro .
Packaging unit Vibrasat
®
Pro Console:
• 1 Vibrasat
®
Pro Console
• 1 mains cable
• 1 USB service interface release key
• 1 instructions for use
Packaging unit Vibrasat
®
Pro Wand
• 1 Vibrasat
®
Pro Wand
• 1 cannula holder
• 10 O-rings (not sterile)
• 1 reprocessing instructions
It is advisable not to dispose of the packaging and to use it again for any
service required.
Only send the devices in their original packaging to prevent damage during
transportation.
4.2 Suitable operating environments Vibrasat
®
Pro
The Vibrasat
®
Pro is suitable for environments in the following areas:
• Professional healthcare facilities with specific requirements
Clinics (rooms in A+E, hospital rooms, intensive care, operating theatres, except
for in the proximity of active facilities of RF surgery devices or outside of the RF-
shielded room for magnetic resonance imaging, first aid facilities).
Make sure that the box is not damaged on delivery to you. The forwarder
must be notified immediately of any transport damage. Check all products
for damage. Damaged products must not be used. Please contact your
supplier immediately.
To Next Page
Loading...