Page 26 of 34
9 Periodic safety checks
The service, upgrade or modification of the Vibrasat
®
Pro must only be performed by Möller
Medical GmbH or by a person specifically authorised by the manufacturer.
All correspondingly trained persons have an appropriate certificate from the manufacturer
which must be valid, as the certificates do expire. Have them show you the appropriate
certificate if necessary.
All the work performed must be documented, signed and dated. Modifications to the device
by third parties are not permitted. A safety check (SC) must be performed at least every 12
months. All the necessary entries can be made in the medical devices book. Only use the
Vibrasat
®
Pro if the device is functioning safely and/or is safe to operate. In cases to the
contrary, the device must be immediately repaired by the service centre.
To Next Page
Loading...