Page 20 of 34
6000 is shown briefly on the Vibrasat
®
Pro Console. 60 s is then decremented on the
display. If during the boost, the foot switch or play button on the Vibrasat
®
Pro Console is
pressed, the vibration is switched off and the 60 s timer is reset. The timer is also reset if the
button on the Vibrasat
®
Pro Wand is released within 60 seconds.
Repeat activation of the boost function can cause the temperature of the handle to rise.
5.2.2 Vibration control
Switching the cannula vibration on and off:
• Press the Start / Stop button on the Vibrasat
®
Pro Console
• Press the button on the Vibrasat
®
Pro Wand
• Press the On / Off button on the foot switch
If the Vibrasat
®
Pro Wand is switched on, the ring on the Start / Stop display lights up.
5.2.3 Warning notices
If prohibited operating states occur during vibration, the Vibrasat
®
Pro Wand is switched off
and a corresponding warning ID is shown on the display. In addition, the warning symbol is
displayed.
The error must be acknowledged with the Start / Stop button and the vibration switched on
before the Vibrasat
®
Pro Console switches on the Vibrasat
®
Pro Wand again.
Alternatively switch the Vibrasat
®
Pro Console off and on again.
• If the prohibited operating states occur repeatedly, contact the Möller
Medical GmbH service centre.
To Next Page
Loading...