EasyManua.ls Logo

Monaco VMOTO - Checking and Changing Engine Oil

Monaco VMOTO
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Checking:
Stop engine for 2~3 minutes after it is warm. Remove the engine oil gauge and check if
the oil level is below the lower limit.
Fill engine oil to the level between upper and lower limits.
Changing Engine Oil:
Note: Change engine oil according to regular maintenance schedule. If ridden with heavy
loads or long distances, shorten the maintenance schedule for oil changes.
Put oil tray under the left crankcase and remove the oil drain plug. Re-install the drain
plug when the engine oil is drained. (Note that on some engines the drain plug and the
oil strainer plug are the same.)
Clean up the oil filter