1. Dirty brake lining/pads or brake disc.
2. Wheel incorrectly mounted.
3. Deformed brake disc.
4. Clogged brake line.
5. Wear of the brake lining/pads.
6. Damage of the seal of the brake calliper piston.
7. Deteriorated brake fluid.
8. Air in the brake system.
5.2 Front Wheel
Place the scooter on the main stand for maintenance.
Disassembly:
Speed meter cable nut.
2 tightening bolts on calliper.
Calliper.
Note: Do not apply brake when removing calliper from brake disk.
Front wheel.
Inspection: Check for eccentricity and wear.
To Next Page
Loading...