FG038 MK2 Divider RevA19 13-02-19
6 Start machine by using start button (37)
NOTE: On dividers connected to new type bread plants the divider will start only if the
infeed button on the intermediate prover control panel has been pressed.
7 Regulate drip feed to 30 drops per minute at each regulation valve (38).
8 Run machine for two minutes to allow oil to circulate.
Then Stop Machine
9 Set machine weight control adjustment hand wheel (39) to required "guide"
setting (see section 10.0).
To Next Page
Loading...
Need help?
General