Moog THE SOURCE User Manual

STORING PROGRAMS
A point mentioned several times earlier in this manual is that if a program position was touched,
all previous editing was "erased." Often, however, an edited version of a program may be
preferred over the original program.
Changes made in existing programs may be stored in memory as new programs. In fact,
changing existing programs is the only way to produce new sounds.
TO STORE A PROGRAM, FOLLOW THIS PROCEDURE:
1. Set up the desired sound.
2. Touch ■SOTBM . (Two dots light up in the program display.)
3. Touch KKtiaa and the intended program location simultaneously.
For example:
Note that in all the following
examples, the final sound
stored in memory began as an
existing program. The existing
program was substantially
changed, and a new, desirable
sound resulted.
VOLTAGE CONTROLLED FILTER
KB TRACK
26 73 27
FILTER
0 65 42 11
0 53 99 0
MODIFIERS
11

Moog THE SOURCE Specifications

General

Brand	Moog
Model	THE SOURCE
Category	Synthesizer
Language	English