Moog THE SOURCE User Manual

KB TRACK
As mentioned above, The Source's filter is voltage-controlled; voltage at its control input will raise the cutoff
frequency.
The KB Track switches route the keyboard voltage (the same voltage that controls the oscQlators) to the filter.
Without this voltage, higher notes will sound disproportionately "dull" because the filter is not following pitch
relationships. The keyboard voltage may be applied fully, attenuated to half, or cut off entirely.
Touch program
1. Touch |f<i:fHjfira» ftiaa Play from the lowest key to the highest. Note how the sound lessens in
intensity toward the upper end of the keyboard.
2. Repeat Step 1 with
across the keyboard.
KB TRACK at
and at
The character of the sound is more consistent
KB TRACK
3. Set QjJ2|QQ33BQQ2J] and all Mixer controls to zero. Set EJjgjEaH to 99. Touch
Play different notes on the keyboard. In this mode, the filter may be "played" in the same manner as the oscillators.
33

Moog THE SOURCE Specifications

General

Brand	Moog
Model	THE SOURCE
Category	Synthesizer
Language	English