Moog THE SOURCE

USING THE REMAINING LEVEL 2 CONTROLS
AUTO TRIG
The Auto Trig function generates a metronomic trigger at the LFO rate. The pitch heard
is determined by the last key depressed.
To use the Auto Trig function:
1. Play the desired key.
2. Touch nxiUWA, then rawiHM (program 12).
3. Adjust trigger rate with the modulation psfiii^ control.
4. To shut off the automatic triggering, touch ■■aaaaei , then
AUTO TRIG
Since keyboard voltage
is stored as a digital
value, pitch drift cannot
occur if Auto Trig is left
running.
again.
When the
function has been acti
vated, control returns to
Level 1.
S&H (SAMPLE & HOLD)
The Sample & Hold function generates successive random control voltage amounts, which are sent to
the oscillators and/or the filter. The rate of change of this voltage is determined by the rate of the
low-frequency oscillator (LFO). Triggers are generated to coincide with voltage changes.
To use the Sample & Hold:
VOLTAGE CONTROLLED FIlXBR
KB TRACK
LOUONE8B CONTOUR
23