Moog THE SOURCE User Manual

3. Touch lllSMtl;iafligWi:«iI (program 7). The sequence will play once from
the beginning. As the notes are played, touch programs at the appropriate times.
4. At this point, the sequencer can play back with or without program changes. For playback
with program changes, touch tmi^WtM , then HSBBISHBISHSlSl^n (program 12),
then IJBMH (or QQ^]). F°r Payback without program changes, follow normal sequencer
procedure (see Using the Sequencer on page 15).
5. A different sequence of program changes may be recorded for Sequence 2.
SUMMARY:
1. The program sequencer will automatically change programs when the sequencer is running.
2. The program sequencer is loaded by touching program numbers while the sequencer plays back.
3. Sequencer playback can occur with or without program changes.
A program change recorded
at any point in the duration
of a note will occur at the
beginning of that note during
playback. (For efficient
operation, see The Program
Sequencer in the Digital
Functions section on page 45.)
20

Moog THE SOURCE Specifications

General

Brand	Moog
Model	THE SOURCE
Category	Synthesizer
Language	English