Moomba Craz User Manual

11
© 2016 Skier’s Choice, Inc.
WaRnIng PlaTes & labels
Read and note ALL warning plates and labels from bow to
stern that appear on the boat, including these.
If your warning decals should become damaged in any way,
please contact your Moomba Dealer or write Skier’s Choice,
Inc. to request replacement warning decals. The decals will be
provided free of charge. Your boat’s serial number (located on
the transom) must be included for warning decal requests.
Skier’s Choice, Inc. reserves the right to change warning labels without notication or incurring obligation. For a copy of the most current warning labels,
please contact your dealer or Skier’s Choice, Inc.
TYPICal WaRnIng label loCaTIons
— V-DRIVe MoDels
Warning labels are placed
on your boat to alert you
to potential hazards that
may not be obvious. They
also tell you how to avoid
the hazard. Warning labels
should never be removed
and, if any label is damaged,
it should be replaced as soon
as possible.

Moomba Craz Specifications

General

Ballast Capacity	3, 700 lbs
Beam	102 inches
Engine	Indmar Raptor 400
Engine Options	Indmar Raptor 400, Indmar Raptor 450
Length	22 ft