Moomba Craz User Manual

44
© 2016 Skier’s Choice, Inc.
oPTIonal TonneaU CoVeR
The optional tonneau cover is designed to snap over the bow
of the boat. Its purpose is to minimize air ow into the cockpit
area when the boat is in use and as a storage cover when used
in combination with the optional cockpit cover.
DO NOT trailer the boat with the tonneau cover installed.
The tonneau cover is not designed as a trailer cover and
may come unsnapped or rip. This type of damage IS NOT
covered by your boat warranty!
oPTIonal CoCkPIT CoVeR
The optional cockpit cover is a snap down storage cover
designed to help protect the interior of your boat. To install the
cover, start at the windshield and work towards the transom. Be
sure to install the cover poles to prevent water pocketing.
DO NOT trailer the boat with the cockpit cover installed.
The cockpit cover IS NOT designed as a trailer cover and
may come unsnapped or rip. This type of damage IS NOT
covered by your boat warranty!
Auto Flow 2.0 is a new wake surf enhancement device that
transforms wakeboarding wakes to fun versatility shaped surf
waves without adjusting ballast thanks to straight forward
operation and eective reliable design. Moomba’s Flow Surf
harnesses the ow of water at surf speeds.
Simply deploy blades by selecting the side you would like to
surf using the Auto Flow switch.
oPTIonal MooMba aUTo floW 2.0

Moomba Craz Specifications

General

Ballast Capacity	3, 700 lbs
Beam	102 inches
Engine	Indmar Raptor 400
Engine Options	Indmar Raptor 400, Indmar Raptor 450
Length	22 ft