47
© 2016 Skier’s Choice, Inc.
Adjusting the Brightness
Ensure Brightness is highlighted and press the Soft Key 3 until
the desired Brightness of the screen appears. Once the status
bar reaches the end, Soft Key 3 will make the bar start at the
beginning and increment with repeated Soft Key 3 presses.
Adjusting the Contrast
Use the down arrow to highlight Contrast, and press the Soft
Key 3 until the desired Contrast of the screen appears. Once
the status bar reaches the end, Soft Key 3 will make the bar
start at the beginning and increment with repeated Soft Key
3 presses.
Changing the Units
Use the down arrow to highlight Units, and press the Soft Key
3 to toggle between Metric and US Std.
Adjusting the Paddlewheel
Oset Use the down arrow to highlight Paddlewheel Oset,
and press the Soft Key 3 quickly to increase the oset by 10ths.
Holding in the Soft Key 3 will increase the oset by whole
numbers. The Paddlewheel Oset range is -5.0 to 5.1.
Returning to the Main Menu
Use the down arrow to highlight Back (Main Menu) and press
the Soft Key 3.
Ballast Settings
The Ballast Settings screen will appear as follows:
To adjust the Fill or Drain times, highlight Fill/Drain and press
the Soft Key 3. The following screens will appear:
Adjusting the Ballast Time
Ensure the appropriate position is highlighted, and press the
minus (Soft Key 1) or the plus (Soft Key 5) to adjust accordingly.
To return to the Ballast Settings Menu, highlight the Back (Ballast
Settings) selection and press the Soft Key 3. System Information
The System Information screen will appear as follows: Pressing
any Soft Key will return to the Menu page.
System Information
The System Information screen will appear as follows:
Pressing any Soft Key will return to the Menu page.
Night/Day
This setting simply turns off the backlighting for use in
the daytime, and turns on the backlighting for use during
nighttime.
Night View
To Next Page
Loading...
Need help?
General
