Moomba Craz User Manual

29
© 2016 Skier’s Choice, Inc.
DOCKING LIGHT SWITCH
The Docking Light switch supplies power to the
docking lights. Switch must be turned on
before lights will operate.
NOTICE
If any lights, bilge, stereo, courtesy lights, or accessories fail to operate, press the
appropriate circuit breaker located under the switch.
Switch conguration may vary slightly based on options. If you have any questions regarding operation, please contact your dealer or Skier's Choice, Inc.
COURTESY LIGHT SWITCH
The Courtesy switch supplies power to the
lighting throughout the boat.
NAVIGATION LIGHTS SWITCH
The Navigation Light switch supplies power to
the Bow Light, the Stern Light and the Pole
Light.
Operation (Refer to Illustration Below):
When underway during night time operation,
set the switch in the NAV position to activate all
of the running lights.
When docked or at anchor, set the switch, in
the ANC position to activate only the pole light.
BALLAST SWITCHES
The Ballast switches supply power to the
ballast pumps. Conguration may vary
depending on the number of ballast bags.
NAV Lights
ANC Lights
ACCESSORY SWITCH (2 POSITIONS)
The Accessory switch supplies power to an
extra circuit for accessories that may be added.
COURT
ON
OFF
LIGHTS
NAVIGATION
ANCHOR
ACCACCACCACC ACC ACC
LEFT SIDE PANEL SWITCHES
ACCACC ACCLEFT
BALLAST
FILL
EMPTY
ACCFRONT
BALLAST
FILL
EMPTY
ACCRIGHT
BALLAST
FILL
EMPTY
ACCBILGE
MANUAL
AUTO
RIGHT SIDE PANEL SWITCHES
M seRIes sWITCH Panel

Moomba Craz Specifications

General

Ballast Capacity	3, 700 lbs
Beam	102 inches
Engine	Indmar Raptor 400
Engine Options	Indmar Raptor 400, Indmar Raptor 450
Length	22 ft